9
BLOWING OPERATION
This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed.
1. Verify that the power cord is disconnected from the outlet.
2. Make sure the collection tank is empty before using as a blower.
3. Remove hose from the vacuum port.
4. Insert the locking end of the hose into the blowing port on the back side of the power head
and lock into position. (fi g. 1)
5. Fit the desired extension wand and or nozzle to the vacuum hose. (fi g. 2)
6. Ensure the power switch is turned off and plug in the power supply. (fi g. 3)
7. Before turning on the vac, fi rmly hold loose end of the hose. Turn the motor on by pressing the
switch to the ‘I’ ON position. (fi g. 4)
WARNING:
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN
CANADA, CSAZ94.3) BEFORE USING BLOWER.
WARNING:
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT
BE INHALED.
CAUTION:
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
Summary of Contents for VJC809PF
Page 13: ...13 EXPLODED VIEW ...
