Vacmaster VDK611PF 0201, Operator'S Manual

Page: 8 / 18

8
7. Insert the handle into the slots located on the top of the power head and secure it with the
screws provided. Do not over-tighten screws (Fig. 10).
8. Your vacuum comes ready for dry vacuum cleaning. If the cartridge filter is not installed, refer to
page 14 for installation instructions (Fig. 11 & 12).
9. Optional: For improved dust filtration, fit the dust bag flange onto the inlet port, taking care not to
damage the bag (Fig. 13).
10. For wet vacuum cleaning, remove the cartridge filter, and install the supplied foam wet filter
(Fig. 14). See page 15 for the foam wet filter installation instructions.
11.Place the power head back on the collection tank aligning the top section with the latches, and
snap into place (Fig. 15).
12.Fit the drain cap onto the drain port and turn clockwise to secure (Fig. 16).
13.Insert the larger end of the hose into the vacuum port of the collection tank and lock into place
(Fig. 17).
14.Choose the desired accessory and insert onto the end of the hose or extension wand (Fig. 18).
POLARIZED PLUG
To reduce the risk of electrical shock, this appliance has a polarized plug (one blade wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.