8
OPERATION
!
To reduce the risk of electric shock, this
Pump Accessory has a built-in GFCI
(Ground Fault Circuit Interrupt) plug with
a ground connection. The plug must be
used on a properly-grounded outlet. If the
plug does not fi t into the outlet, contact a
qualifi ed electrician to install the proper
outlet. Do not modify the plug in
any way.
After you plug the power cord into the
outlet, you should always test the GFCI.
Press the red “RESET” button to reset your
Pump Accessory. This has to be done each
time the pump accessory is plugged into
an outlet. If the red “RESET” indicator does
NOT pop up, your unit is not functioning
properly and you should contact an
Independent Service Center to have your
Pump Accessory serviced. Once you have
plugged the power cord into the outlet and
the tested GFCI, you are ready to run your
pump.
NOTE: The Pump Accessory should not be
operated on the same circuit as the
Wet/Dry Vac.
WARNING: To reduce the risk of fire or explosion, do not operate this vac in
areas with flammable gases, vapors, or explosive dust in the air. Flammable
gases or vapors include but are not limited to; lighter fluid, solvent type
cleaners, oil-base paints, gasoline, alcohol, or aerosol sprays. Explosive
dusts include but are not limited to; coal, magnesium, aluminum, grain,
or gun powder. Do not vacuum explosive dust, flammable or combustible
liquids, or hot ashes. Do not use this vac as a sprayer. To reduce the risk of
health hazards from vapors or dusts, do not vacuum toxic materials. Store
Pump Accessory indoors. Do not submerse pump or power cord.
!
WARNING:
The operation of any utility vac can result in foreign objects being blown
into the eyes, which can result in severe eye damage. Always wear safety eyewear
complying with ANSI Z87.1 (or in Canada, CSA Z94.3) before starting operation. Safety
eyewear is available at many local retail stores.
!
CAUTION: To reduce risk of hearing damage, wear ear protectors when using
the vac for extended hours or when using it in a noisy area.
TEST
Button
RESET
Button
GFCI (Ground Fault
Circuit Interrupt) Plug
RESET
TEST
