Vacmaster EasyClean SCA0801, Manual

Page: 11 / 16

11
GB
TROUBLESHOOTING
WARNING: To reduce the risk of electric shock, unplug before troubleshooting.
PROBLEM POSSIBLE CAUSE SOLUTION
The cleaner is not
operational.
Unplugged at power outlet. Plug in firmly to suitable power outlet.
Defective power outlet.
Check with a good appliance. Be sure
the power cord plug is fully plugged
into an electrical outlet.
The motor is damaged.
Have the damaged part checked by
qualified personnel or contact the
after sales helpline.
Poor pick-up
performance.
Dirty water tank is not installed
correctly.
Check the dirty water tank for correct
installation. Ensure it is installed in
place.
Dirty water tank is full. Empty the dirty water tank.
The suction hose is clogged. Clean the hose.
Float value is activated. Empty the dirty water tank.
Water escapes
from the cleaner.
Dirty water tank is full. Empty the dirty water tank.
Dirty water tank is not installed
correctly.
Check the dirty water tank for correct
installation. Ensure it is installed in
place.
Clean water tank is not installed
correctly.
Check the clean water tank for correct
installation. Ensure it is installed in
place.
No solution
spraying out.
Clean water tank is empty. Fill the clean water tank.
Clean water tank is not installed
correctly.
Check the clean water tank for correct
installation. Ensure it is installed in
place.
The cleaner is overheated.
Unplug the power cord and let the
cleaner cool down for 30 minutes.
Restart the cleaner. If the problem
persists, contact the after sales
helpline.