Vacc-Safe VS -25L Series User Manual Download Page 22

20

Discontinuation: If the equipment is stored in an unsupervised area for a long time 

and is not used, the power supply should be cut off and the inner 
and outer surfaces of the box should be wiped clean with a warm 
and wet soft cloth, and then dried and sealed; It is necessary to 
ensure that the equipment is locked, and that child cannot open 
the door to prevent accidents such as suffocation.

End-of-life:

When the equipment reaches the end of its service life, it should 
be scrapped and must be handed over to qualified professional 
recycling organizations for scrapping and disposal in accordance 
with local regulations and ordinances; non-professionals 
should not disassemble or disassemble the equipment without 
authorization; Scrapped equipment should be placed in 
designated areas that are inaccessible to child to avoid danger.

Troubleshooting and Maintenance Services

When there is a failure in the product, please check and handle it according to 

the following table. If the situation cannot be changed, please inform 

Vacc-Safe

 

Biological Service Center in time. We will serve you wholeheartedly to avoid any 
loss to you.

Malfunction

Troubleshooting

Freezer does not 

work

Check whether the input power meets the 

requirements
Whether the plug and the socket are in poor contacts
Whether the input and control lines are faulty
Whether the voltage is too low

Summary of Contents for VS -25L Series




























Reviews: