VAC D400, Operating Instructions Manual

Page: 30 / 71

30 Electro-pneumatic positioner TZIDC-220 42/18-82 EN
3.5.4 Parameter setting example
"Changing zero position (of the LCD) from clockwise to counter-clockwise"
Starting situation: the positioner is operating remote-controlled.
1. Cange over from the remote level to the operating level:
- Press and hold
MODE
and
ENTER
simultaneously.
- Wait until the countdown has run down from 3 to 0.
- Release
MODE
and
ENTER
. Mode 1.1 is reached and indicated.
2. Change over to the configuration level:
- Simultaneously press and hold and .
- In addition, briefly press
ENTER
.
- Wait until countdown from 3 to 0 has run down.
- Release and
.
is displayed.
3. Change over to parameter group 3._:
- Simultaneously press and hold
MODE
and
ENTER
.
- In addition 2 x briefly press .
is displayed.
- Release
MODE
and
ENTER
.
is displayed.
4. Select parameter 3.2 "Zero position”:
- Press and hold
MODE
.
- In addition, 2 x briefly press .
is displayed.
- Release
MODE
.
IMPORTANT
An overview of the parameter settings that can be changed via the front
panel keypad is found in Appendix A.
conf
mA
%
C °
conf
mA
%
C °
conf
mA
%
C °
conf
mA
%
C
°