5
Vacuum Compressor Fan
Cleaning Instructions
Safety Labels
Safety labels have been installed on your VAC-CON
unit to alert you of potentially dangerous conditions.
Read, understand and follow all Danger, Warning,
Caution and instruction labels before operating or
servicing your equipment. Below are examples of
labels that may be located on your machine.
VAC-CON
692-0068
DO NOT stand behind machine
when dumping.
DO NOT work under opened
door without safety arm in place
and vehicle engine OFF.
DO NOT drain excess water or
transport unit unless safety locks
are in place.
DO NOT close door locks if
locking arms are out of reach
of door rollers.
WARNING
dumping load.
Clean out when
NOTICE
VAC-CON
692-0335
The decal below is located on the centrifugal separator
door.
Never operate the vacuum compressor with
the door open unless you are cleaning the vacuum
compressor following the instructions in this
manual.
VAC-CON
692-0207
DO NOT operate vacuum
Rotating fan blades.
compressor with cover open.
Cleaning the Vacuum
System
1. Unlatch and open the Centrifugal Separator Door.
2. Unlatch Safety Tee Handle and Open Rear Door
Latches. Make sure debris tank is empty.
3. Engage the hydraulic system and tilt the Debris
Tank approximately 2 ft. as shown.
