VABSCE VB-007 User Manual Download Page 4

Battery Installation

Open battery compartments and install the 8XAA batteries being sure to follow the polarity

markings inside the battery compartment.

Close the battery covers.Please pay attention to the direction of covers.
Inserting / Removing the TF card
Insert the TF card into the TF card port and push until it locks in place.

To remove the installed TF card, please push the TF card inward to release it.

Storage capacity: 8GB or above is recommended

Note: The device will show the icon "

"if the micro SD card in not installed.

Turning On the Night vision binoculars device

Power On: Press the power button still for about several seconds to start the Night vision binoculars
device.
Turning Off the Night vision binoculars device

Power Off: Press the power button for about several seconds to turn off the Night vision binoculars
device.

Key Button Functions

MODE

Toggles between Video / Photo / Playback / Menu

SNAP

In video mode: Press to take video. To stop recording, press this button again.
In photo capture mode: Press to take photo.
In playback mode: Press to Play or delete the video.
In Menu mode: Press to select.

ZOOM

In video mode: Press to zoom out.
In photo capture mode: Press to zoom out.
In playback mode: Press to select the next picture or video
In menu mode: Press to select the previous menu listing.

IR

In Video/Photo mode: Press to turn on the infrared light. With each additional
click, the IR brightness will increase
In playback mode: Press to select the previous photo or video.
In menu mode: Press to select the next menu listing.

Summary of Contents for VB-007

















Reviews: