VABCHES J3L101BS01, Manual, Page: 24 / 24

24/24
MODE
+
SPEED
-
DEMO
SPEED
+
MODE
-
COLOR
+
COLOR
-
BRIGHT
+
BRIGHT
-
MODE
+
/MODE:
-
Remote control instructions
DEMO:
SPEED/
+
SPEED:
-
COLOR/
+
COLOR:
-
BRIGHT
+
/BRIGHT:
-
ON/OFF
NOTE
1. During use, if the switch can work normally, but the remote control cannot, you need
to perform the code matching operation.
2.If the light is interfered by other remote controls or cannot be controlled remotely.
Please power off and then power on again before performing code matching.
How to perform code matching operation: Press and hold the start button on the remote
control for 3 seconds within 10 seconds of turning on the power, the light strip flashes 3
times with white light, indicating that the code
（
remote control
）
is matched.
Description of switch function
1. Power on/off:Press and hold the power button.
2.Change the mode:Short press the cycle button.(Multiple
mode options:Static Red/Static Green/Static Blue/Static
White/Multicolor Blinking/Multicolor Breathing/Red
Breathing/Blue Breathing/Green Breathing)
3.Adjust the flashing speed:Short press the power button.
4.Adjust the brightness:Press and hold the cycle button and
short press the power button meanwhile.
Mode /Previous mode
Mode switch-/Next mode
Color cycle display mode,At demo mode
，
it plays dymamic modes in loop.
Adjust the flashing speed(Six speed mode)
Adjust the brightness(Six brightness mode)
（
Both dynamic and static can be used
）
Switch color
（
switch between static color
）
In addition, there are 7 colors, making up a total of 25 color modes.
Cycle Button
You can use the switch or remote to
control the lighting effects.
RGB LED Controller Instrustions
Switch to dynamic mode from static color
，
or switch between dynamic modes.