VABCHES D8L232BS01, Manual, Page: 24 / 24

24/24
STEP16
MODE
+
SPEED
-
DEMO
SPEED
+
MODE
-
COLOR
+
COLOR
-
BRIGHT
+
BRIGHT
-
MODE
+
/MODE:
-
Remote control instructions
DEMO:
SPEED/
+
SPEED:
-
COLOR/
+
COLOR:
-
BRIGHT
+
/BRIGHT:
-
Plug the connector of light 11 into
the socket board of light 8, and
you can use the remote control to
control your lighting effects.
ON/OFF
NOTE
1. During use, if the switch can work normally, but the remote control cannot, you need
to perform the code matching operation.
2.If the light is interfered with by other remote controls or cannot be controlled remotely.
Please power off and then power on again before performing code matching.
How to perform code matching operation: Press and hold the start button on the remote
control for 3 seconds within 10 seconds of turning on the power, the light strip flashes 3
times with white light, indicating that the code
（
remote control
）
is matched.
Description of switch function.
1. Power on/off:Press and hold the power button.
2.Change the mode:Short press the power button.(Multiple
mode options:Static Red/Static Green/Static Blue/Static
White/Multicolor Blinking/Multicolor Breathing/Red
Breathing/Blue Breathing/Green Breathing)
3.Adjust the flashing speed:Short press the cycle button.
4.Adjust the brightness:Press and hold the power button and
short press the cycle button meanwhile.
Mode /Previous mode
Mode switch-/Next mode
Color cycle display mode
Adjust the flashing speed(Six speed mode)
Adjust the brightness(Six speed mode)
Switch color
In addition, there are 7 colors, making up a total of 25 color modes.
Cycle Button