| 3
INSTALLATION
This equipment is not designed for maritime use or for use in mobile installations such as
caravans or aircraft, except under certain conditions. Contact the Vaask Technical Service
Department at +1 (512) 956-7687 with specific requirements.
Inspect the fixture for transport damage, and do not install or use a damaged unit.
Contact Customer Service at +1 (512) 956-7687 if you find damage.
ELECTRICAL SAFETY
Before installation, make sure the voltage and frequency listed on the data plate match
that of the electrical supply. This data must correspond in order to prevent injury and
machine damage. Consult a qualified electrician if you are unsure.
To guarantee the electrical safety of this appliance, it is imperative that continuity exists
between the appliance and an effective grounding system. If you have any doubt, get a
qualified electrician to check the electrical system of the facility. The manufacturer cannot
be held responsible for damages caused by the lack or inadequacy of an effective grounding
system.
Before installation, service or replacing parts, disconnect the power supply to the work area
by manually “tripping” the circuit breaker. This step is not required when refilling the sanitizer
tank.
Disconnection method for fixed wiring must be incorporated in accordance with
wiring rules that apply to the location where installation, service or parts
replacement occurs.
Do not use an extension cord to connect the unit to electricity.
Extension cords do not guarantee the required safety of the appliance.
