EN
Cord Retention Tray Installation
(Optional for both horizontal and vertical installation)
Electrical Installation
1. Adjust the length of the Cord Retention Tray until the screw hole on
the Tray and PDU are aligned.
1. Receptacle evaluation: Ensure that the plug type of your PDU unit (e.g. NEMA 5-15P, NEMA
5-20P, NEMA L5-30P) matches the wall receptacle type that you are using.
PDU must be plugged into a three-wire, grounded wall receptacle only.
The wall receptacle must also be connected to an appropriate branch
circuit/main with fuse or circuit breaker protection. Connection to any
other type of wall receptacle may result in a shock hazard.
2. Attach the Cord Retention Tray to the PDU with the 4 supplied
Cord Retention Tray Mounting Screws (M3 X 6). Tighten the Cord
Retention Tray with the screw on it.
3. Use the Cable Ties provided to fasten each power cord to the Cord
Retention Tray.
!
2. Plug PDU into the wall outlet
3. Attach equipment to PDU
Before attaching equipment, it is important to calculate the total load that you
will be placing on the PDU. It is extremely important not to exceed the PDU’s
maximum current load (as outlined in the Specifications section). In order to
determine your total load, simply add up the amperage of your devices and
ensure that it does not exceed the unit’s capacity.
