2
CONNECT
To avoid possible damage to the loud speakers
or other connected electronic devices, always
connect all cables before turn on the amplifier.
Turn on the V3 GRAND PIANO first before tur
-
ning on any active loud speakers or amplifiers.
Make sure the POWER switch on the
back of the device is in the OFF position
(LED light is not on).
Plug the power adapter that came with
the device into the DC port on the back of
the unit.
Plug the other end of the power adapter
into a power outlet. Make sure that the
adapter is compatible with the power
supply.
Connect the audio outputs to an amplifier,
active loudspeakers or headphones.
Connect the MIDI or USB cable to the V3
unit.
TO TURN ON
Before you turn the device on or off, make sure
that all connected audio devices that amplify
the audio signal (mixer, amplifier, active loud
speakers) have their volumes turned down.
Press the POWER ON/OFF switch on the
back of the device.
Turn up the V3 unit MAIN VOLUME knob
to adjust the volume.
Adjust the volume on your mixer or
active loudspeaker.
TIP
Turn the volume on the V3 unit as loud as pos-
sible, and then adjust the volume of the sound
on your mixer.
CONNECT – USB KEYS
The V3 GRAND PIANO unit can be connected
to any USB Audio Class 1 compatible keyboard.
The V3 GRAND PIANO unit can supply your
USB keyboard with a maximum of 500mA.
If your keyboard requires more than 500mA,
you will need an external power supply.
Just plug in your USB keyboard here.
FOOT PEDAL
The polarity of the sustain foot pedal is set up
automatically when you turn on the V3. The
pedal only works on MIDI channel 1.
AUX OUT - 2nd STEREO OUT
To use the AUX OUT for any MIDI channel, you
must manually change the 4 internal switches
and send a MIDI message on the specified
MIDI channel.
The connection changes from 2 mono jacks to
2 stereo jacks.
One stereo jack gives you the MAIN in stereo;
the other one the AUX in stereo.
SELECT SOUNDS
The V3 GRAND PIANO sound board is a
16-channel, multi-timbral MIDI tone genera-
tor. Change sounds by sending a program
change through MIDI.
Sympathetic resonance, sustain pedal grab-
bing and the half pedal function are only
active on MIDI channel 1.
LEGEND
C
= Chorus effect on
S
= Sympathetic resonance
V
= Number of necessary voices (OSC) per note.
STEREO L + R
= BABAA (grafic)
AUX
= BBABB
ABOUT POLYPHONY
The unit offers 256 mono voices. Many sounds of the V3
Grand Piano use 6 voices per note.
If you hit 10 notes at the same time, 60 voices are used.
If you hold down the sustain pedal, the 60 voices are
sustained and still in use. If you play again, 60 more
voices are needed.
So, do not forget to release the sustain pedal!
