12
11
PROGRAM LIST SOLO SOUNDS
13. SOUND PARAMETERS
There are two ways to change sound parameters:
13.1 When you click in the number field, a pop-up window opens. You can
use the slider or the +/- buttons to change the value. Click [DONE] to apply the
change and close the window.
By clicking on the +/- buttons
or by clicking in the number field directly.
13.2 Graduated output
Clicking on the +/- buttons changes the MIDI values by fixed steps. If you
click the + button rapidly many times, only the end value will be output.
PROGRAM LIST SOLO SOUNDS
14 VOLUME – EXPRESSION – TRANSPOSE – REVERB
The parameters for the selected sound can be adjusted in EDIT mode. Since the
groups LEAD, SPECIAL and DRUMS only allow 1 sound, you can edit the values
of the sound directly.
14.1 Volume
The volume control allows for a “static mix” of volume,
just like the volume control on a standard mixer.
14.2 Transpose
Changes the sound in half step intervals.
Use this parameter to change the octave range.
A value of +12 changes the sound by 1 octave;
+24 by 2 octaves; +36 by 3 octaves, and so on.
14.3 Reverb
Amount of reverberation
14.4 Chorus
Chorus is a beat, especially popular with e-pianos.
14.2 Expression / Rocker switch / Bellows dynamic
V3 sound expanders encompass the MIDI expression controller (MIDI con-
troller 11), which handles dynamic volumes (crescendo). Please read the
notice on page 16 regarding the scene switch with Expression/Rocker switch/
Bellows dynamic.
Reverb Return Potentiometer am Soundmodul
Am V3 Soundexpander finden Sie den Master Volumen
und den Master Reverb Drehregler.
Die Reverb-Lautstärke ist abhänging von diesem Regler.
Wir empfehlen den Regler für den Reverb Return immer
auf den selben Pegel zu belassen. Als Grundeinstellung
wären 50% zu empfehlen.
