2
IMPORTANT INFORMATION
2.1
SAFETY INSTRUCTIONS
¡¡WARNING!!
Not observing the safety instructions can result in risk of death, injuries and damage to the
device! V2C assumes no liability for claims resulting from this!
• Electrical hazard / fire hazard!
Never use damaged, worn or dirty charging plugs. The first time tuning on the electrical charging
station must be carried out exclusively by competent and qualified technical personnel, fully
responsible for compliance with the installation regulations and existing standards.
Never use damaged, worn or dirty charging connectors.
• The owner must ensure that the charging station is only ever operated in perfect conditions:
- Repair work to the charging station is forbidden and may only be performed by the
manufacturer (the charging station must be replaced)!
- Do not carry out any unauthorized conversion work or modifications to the charging station!
- Do not remove any notices on the device, such as safety symbols, warning notices, rating
plates, nameplates or cable markings!
• The charging station does not have its own power switch! The RCD circuit breaker and the line
circuit breaker of the building installation serve as main connectors.
• No extension cables are permitted for connecting an electric vehicle to the power supply
device for electric vehicles.
Only electrical vehicles or their chargers may be connected. No connection of other loads is
permitted (electric tools etc.)!
• Read the information and the instructions for your vehicle carefully before you charge the
vehicle using the charging station.
• Ventilation: A number of vehicles require an external ventilation system in the interior areas
due to the possible creation of toxic or explosive gases during the charging procedure.
• Unplug the charging cable by pulling on the connector, never on the cable.
• Risk Damage! Never clean the charging station with a jet of pressurized water (from a hose,
high-pressure cleaner etc).
4
