TRACKING
: (see
Fig. 3
) All skis are placed in a jig so that the
wheels are perfectly aligned with the shaft. This does not guarantee
that the ski will track straight for the user. Very few people are
perfectly aligned anatomically, and boots and bindings may also be
slightly misaligned. The tracking device is the small aluminum piece,
rectangular in shape but rounded at one end, attached to the front
fork between the lock nut that holds the wheel axle bolt and the fork.
Scribe a pencil line on the fork along the edge of the tracking device.
If your ski is tracking to the right, loosen the lock nut and move the
tracking devise slightly forward and retighten. If the ski tracks left,
move the devise slightly toward the rear. Adjust incrementally until
the skis track properly for your physiology
.
WARRANTY:
Jenex Inc. warrants to the original purchase of V2 roller skis, that Jenex will repair free of charge
any item that under
normal service
proves defective in material or workmanship, as determined by Jenex
inspection, for a period of 24 months from the date of purchase. The claimed defective product must be returned
to Jenex with transportation charges prepaid.
Warranty applies only if the skier weight is less than 195 lb
(88 kg) for XL150 models, 155 lb (70 kg) for XL125 models
. Warranty does not include wear items like wheels,
speed reducers and brake pads. Warranty does not cover tires and tubes. The chassis (shafts and fork
assemblies) are not warrantied if there is substantial stress damage such as deep scrape and gouge marks on
the bottom of the shafts and/or fork assembly.
V2 JENEX INC. 172B SOUTH ST. MILFORD, NH 03055
603-672-2600 1-877-825-3639 www.jenex.com [email protected]
Revised 5/22
FIG 3