10 Trouble-shooting
… insufficient vacuum in the bag
Possible cause
Solution
▪
The vacuuming level se-
lected was too low for the
particular foodstuff used.
▸ Select the next highest level.
▪
The suction inlet of the va-
cuum pump is obstructed.
▸ Ensure the bag is not obstructing the suc-
tion inlet of the vacuum pump.
▪
The bag is not airtight.
▸ Vacuum seal the food in a new bag, select-
ing a higher level for the sealing time if ne-
cessary.
… the vacuum bag is incorrectly sealed
Possible cause
Solution
▪
The sealing time set was
insufficient for the vacu-
uming level selected.
▸ Select the next highest sealing time level.
▪
The vacuum bag is not
positioned correctly on the
sealing bar.
▸ Position the vacuum bag correctly.
▪
The vacuum bag is con-
taminated around the
sealing seam.
▸ Clean the sealing area before the process.
▪
The seal pad, located on
the appliance lid, is very
worn.
▸ Replace the seal pad.
▪
Repeated vacuuming has
caused the appliance to
overheat.
▸ Allow the appliance to cool down before us-
ing again.
33
Summary of Contents for VS60144
Page 1: ...Operating instructions VS60144 Vacuum drawer...
Page 41: ...41 14 Notes...
Page 42: ...42...
