V-ZUG V6000 A905, Operating Instructions Manual

Page: 14 / 24

5 User settings
Touch the button to switch the appliance off at any time.
5 User settings
The following user settings can be set and saved individually:
User setting Setting value Factory
setting
P0 Acoustic signal
loudness
0 Low 2
1 Medium
2 High
P1 Acoustic signal at
end of operating
time / timer
0 No acoustic signal 2
1 Automatically off after 10 secs.
2 Automatically off after 1 min.
P3
Automatic boost 0 Automatic boost off 1
1 Automatic boost on
P4 Default operating
time / timer
duration
0 Default duration 0 mins. 3
1–9 Adjustable in steps from 10–90 mins.
P5 Acoustic signal
when buttons are
pressed
0 Acoustic signal off 1
1 Acoustic signal on
P6 Restore factory
settings
0 To restore factory settings: Hold the button
depressed for 2 seconds. 0
5.1 Changing user settings
▸ With the hob switched off, simultaneously hold the and buttons depressed for
3 seconds.
– An acoustic signal is emitted.
▸ Hold both sliders to the left of display 3 depressed at the same time until an acoustic
signal is emitted.
– The user setting, e.g. , appears in display 3 .
– The current user setting value is shown in display 2 .
2 3 1
▸ Use the button to select the next highest and the button the next lowest user
setting.
▸ Touch or swipe slider 1 to select a higher or lower setting value.
14