3 Controls and displays
3.1 Operating and control elements
Fig. 2
(1) On/Off button
(6) Alarm button
(2) Temperature display
(7) Alarm symbol
(3) Up/Down button
(8) Menu symbol
(4) Quick Freeze button
(9) Child lock symbol
(5) Quick Freeze symbol
(10) Power failure symbol
3.2 Temperature display
During normal operation, the display shows:
-
the highest freezing temperature
The temperature display flashes if/when:
-
You change the temperature setting
-
The appliance is not cold enough after switching on
-
The temperature rises by several degrees
Stripes flash in the display if/when:
-
The freezer temperature exceeds 0 °C.
The following displays indicate a fault. Possible causes and
solutions: (see 7 Malfunctions) .
-
The QuickFreeze symbol flashes together with the
temperature display.*
-
F0
to
F9
*
-
The power failure symbol
flashes.
4 Putting into operation
4.1 Transporting the appliance
u
Transport the appliance only in suitable packaging.
u
Transport the appliance upright.
u
Do not transport the appliance on your own.
4.2 Disposing of packaging
WARNING
Danger of suffocation due to packing material and plastic
film!
u
Do not allow children to play with packing material.
The packaging is made of recyclable materials:
-
corrugated board/cardboard
-
expanded polystyrene parts
-
polythene bags and sheets
-
polypropylene straps
-
nailed wooden frame with polyethylene panel*
u
Take the packaging material to an official collecting
point.
4.3 Switching on the appliance
u
Open the door.
u
Press the On/Off button Fig. 2 (1).
w
The temperature display lights up. The appli‐
ance is switched on.
w
If “DEMO” is displayed, demo mode is acti‐
vated. Please contact the after sales service.
5 Control
5.1 Child proofing
The child-proofing function enables you to make
sure that the appliance is not inadvertently
switched off by playing children.
5.1.1 Setting the child lock function
u
Activating the setting mode: Press the QuickFreeze
button for around five seconds.
w
c
flashes on the display.
w
The menu symbol Fig. 2 (8) shines.
u
Briefly press QuickFreeze button to confirm.
When
c1
is shown on the display:
u
To switch on the child lock, briefly press the QuickFreeze
key.
w
The child lock symbol Fig. 2 (9) shines.
c
flashes in the
display.
When
c0
is shown on the display:
u
To switch off the child lock, briefly press the QuickFreeze
key.
w
The child lock symbol Fig. 2 (9) goes out.
c
flashes in the
display.
u
To deactivate the set-up mode: press On/Off button
Fig. 2 (1) .
-or-
u
Wait for 5 minutes.
w
The temperature is indicated again in the temperature
display.
5.2 Door alarm
An audible signal sounds if the door is open for longer
than 60 seconds.
The audible signal stops automatically when the door
is closed.
5.2.1 Muting the door alarm
The audible signal can be switched off when the door is
open. The audible signal remains activated as long as the
door is open.
u
Press alarm button Fig. 2 (6).
w
The door alarm is silenced.
Controls and displays
38
* Depending on model and options
