background image

1 Safety precautions

5

This appliance is only suitable
for drying textiles which have
been washed in water.

The appliance is only to be
used with the recommended
vaporizing medium. The use
of other substances may give
rise to a toxic or fire risk.

The appliance has hot sur-
faces to evaporate active
components. These surfaces
should not be touched during
use.

The tumble dryer may not be
used if industrial chemicals
were used for cleaning. 

Clean the fluff filters regularly.

Do not allow fluff to build up
around the tumble dryer.

Do not dry unwashed items in
the tumble dryer.

Textiles that have been
cleaned, treated or soaked
with flammable chemicals,
detergents or solvents (such
as white spirit, alcohol, stain
remover, oil, turpentine, acet-
one, paint, wax, etc.) are a
fire and explosion hazard!
Wash materials containing
such substances first by hand
with water or allow the solvent
to evaporate completely.

Items such as foam rubber
(latex foam), shower caps,
waterproof textiles, rubber
backed articles and clothes

or pillows fitted with foam rub-
ber pads should not be dried
in the tumble dryer.

Fabric softeners, or similar
products, should be used as
specified by the fabric
softener instructions.

Remove objects such as
lighters and matches and the
like.

Never stop a tumble dryer be-
fore the end of the drying
cycle unless all items are
quickly removed and spread
out so that the heat is dissip-
ated.

If the appliance is installed on
a carpeted floor ensure that
any ventilation openings on
the base of the appliance are
not obstructed.

If the appliance is installed in
a housing, the ventilation
openings are to be kept free
of obstruction.

Exhaust air must not be dis-
charged into a flue which is
used for exhausting fumes
from appliances burning gas
or other fuels.

Do not install the appliance
behind a door that locks, a
sliding door or a door with a
hinge that lies opposite the
hinge of the appliance.

Summary of Contents for Unimatic TL WP









































Reviews: