V-ZUG Unimatic S 287, Operating Instructions Manual

Page: 13 / 68

2 Your appliance
13
2.4 Using for the first time
Before using the newly installed appliance for the first time, the following work
should be carried out.
Transport lock
Running the first wash cycle without any washing
➤
Run an empty wash cycle to remove any residues from the manufacturing
process.
➤
Add a little washing detergent to compartment II .
➤
Select the main programme .
The appliance was tested with water before being shipped. There may
therefore still be traces of water left in the appliance.
To avoid damage the transport locks must be removed before
placing in operation for the first time (2 screws with washers at the
back of the appliance; polystyrene ring in the drum).
60