4 Operation
Cancelling operation
To cancel operation, the following options are available:
▪
Select the
function button to access the start screen (see page 16).
▪
Press and hold the function button to switch the appliance off (see page 27).
After 3 minutes without interaction.
–
The display goes dark and the appliance switches off automatically (see page
27).
4.20
Switching the appliance off
▸ Press and hold the function button.
–
Any running application is ended; if turned on, the timer will remain active.
–
If turned on, the display lock is deactivated.
–
For applications with steam, the steam is eliminated.
–
The display goes dark.
–
The appliance is in EcoStandby.
Display after switching off
Depending on the application and settings, the following is shown in the darkened dis-
play.
–
The residual heat and the temperature if it is above 80 °C.
–
«Do not remove the water tank» after all applications with steam, as long as the wa-
ter system has not been emptied.
4.21
Emptying the water tank
Risk of scalding!
The water in the tank may be hot. If the following appears in the display: «Do not
remove the water tank», the temperature of the residual water is too high and can-
not be pumped back yet. Do not remove the water tank!
For safety reasons, the residual water is only pumped off when it reaches below a
certain temperature.
After switching off the appliance
–
the residual water in the boiler is pumped back into the water tank.
–
in the display appears: «The water is being pumped off».
Once the water has been pumped off,
▸ Touch the «Open water compartment flap» function button.
–
The flap of the water tank compartment opens.
▸ Remove, empty and dry the water tank.
▸ Slot the water tank back into position in the water tank compartment.
▸ Close the water compartment flap manually.
Any application can be started again.
27
Summary of Contents for S4T-23026
Page 54: ...54 14 Notes...
