V-ZUG Perfect 60i eco, Operating Instructions Manual

Page: 19 / 28

10 Trouble-shooting
Cancelling alarm
▸ Touch any button.
▸ Resolve problem, see Trouble-shooting.
When the Sabbath mode is activated, there are no visual warning signals.
10 Trouble-shooting
This section lists faults that can be solved simply by following the instructions given. If
the fault cannot be remedied, please contact Customer Services. Before contacting Cus-
tomer Services:
▸ please note down
▪ the serial number (SN), which is shown on the identification plate),
▪ the sequence of events that led to the fault.
Malfunction Possible cause Solution
Appliance is not
working. ▪ An interruption in the
power supply. ▸ Check the power supply.
▸ Replace the fuse.
▸ Reset the automatic circuit
breaker.
▪ The fuse or circuit breaker
keeps blowing. ▸ Contact Customer Services.
▪ Appliance is faulty. ▸ Contact Customer Services.
Illumination is not
working. ▪ Sabbath mode is active.
(Function dependent on
model.)
▪ LED light bulb is defective.
▸ Deactivate the Sabbath mode.
(Function dependent on model.)
▸ Contact Customer Services.
Illumination is flash-
ing. ▪ Appliance door has been
standing open for more
than 2 minutes.
▪ Appliance door was not
closed properly.
▸ Close the appliance door.
Malfunction Possible cause Solution
Error display
▪ Various situations can lead
to an «F» message. ▸ Contact Customer Services.
Error display ▪ Temperature sensor in the
refrigerator compartment is
defective. ▸ Contact Customer Services.
– The appliance enters the emer-
gency mode. The refrigerator
compartment is cooled at the
same output level as before
the temperature sensor mal-
function.
19