Installation instructions
Induction hon
GK46TIMPS | GK47TIMPS
1021075-R01
29/11/2016
3
General information about installation
▪
The worktop must be flat so that it is sufficiently sealed against the ingress of liquids.
▪
In order to guarantee good ventilation, a space of at least 10 mm in height is necessary beneath the appliance.
▪
A cabinet element with a width of 900 mm is recommended for the base element.
Overlying installation
The cooking ring layout of the hob to be fitted can differ from the hob illustrated.
≥10
*
B
Y – Y
Drawer/cabinet
W - W
≥1
5
≥10
*
1
Drawer/cabinet
380
880
H
Y
Ri
Y
Cable length 1.7 m
GK46TIMPSZ, GK47TIMPSZ
W
W
2
123
A
869
±1
369±1
900
≥7
0
20
0
Ra
≥7
0
1
825
=
=
369
1
50
* The clearance space must be maintained.
1
Cut-outs in left/right side panels for a niche width of 900 mm, required for appliance ventilation.
2
The front and rear pegs are reinforced underneath. The strut width is determined by the producer of the stone worktop.
The minimum peg width can vary according to the properties of the stone.
Type
A – loosely based on
manufacturer
B
H
Corner radius Ra/Ri
GK46TIMPSZ, GK47TIMPSZ
≥30 mm
≥61 mm
51 mm
5/1.5 mm
A
Worktop depth (in combination with directly built-under oven)
B
Required clearance in the service exchange
H
Measurement from the top side of the worktop to the underside of the hob (ventilation opening)
Ri
Appliance corner radii
Ra
External corner radii of the cut-out
Installation
1.
Create the mounting cut-out accurately.
2.
Carefully place the appliance in the mounting cut-out and push against the work surface until flat.
