EN
– Installation instructions
Dishwasher
1019614-R01
1.
5.
2.
3.
A2
A9
U1/U2
4.
Empty the appliance
The installation test is complete when end of programme is displayed.
Water outlet fault
Close appliance door
within 15 seconds
It takes approx. 2 minutes
If error messages occur:
rectify fault according to the operating instructions
Installation test
The test starts in 15 seconds
Water inlet fault
Voltage fault
Set the water hardness according to the «Using for the first time» section (see
operating instructions)
Select the test by pressing and holding down the + buttons
or + at the same time
or
1.
Carry out the remaining work steps for the initial set-up
OK!
Appliance is ready for operation
2.
1. Initial set-up
