background image

5 Operating the appliance

5.11 

Automatic boost

Do not leave the hob unattended when using the automatic boost.
Risk of boiling over, burning on and igniting!

All the cooking zones are equipped with a selectable automatic boost. With
this function, a cooking zone works at power level   for a certain length of
time (see table). Then it automatically switches back to the power level set. 

The automatic boost function must be activated anew each time a cook-
ing zone is switched on.

Automatic boost is switched off when the appliance is delivered from
the factory. If required the user setting P3 must be changed from 0 to
1, see the «User settings» section.

Power level

1

2

3

4

5

6

7

8

Boost in mins.:secs.

0:40 1:15 2:00 3.00 4:15 7:15 2:00 3:15

If during the automatic boost a higher power level is selected, the dura-
tion will change automatically.

Switching the automatic boost on

▸ Hold the desired power level on the slider 

 depressed for 3 seconds. 

 and the power level illuminate alternately in the display when the

automatic boost is activated.

When the automatic boost is over, the heat output is reduced again to
the power level selected.

Switching the automatic boost off before time

▸ Use the slider to set a lower power level.

23

Summary of Contents for GK26TIMS









































Reviews: