Installation instructions
Built-in variants of gas hob
Multi-sliders GAS411/421
1009436-R07
22/02/2018
1009436-R07
3
Surface-mounted installation
The layout of the hob to be fitted may differ from the hob illustrated!
H
384
501
Ri
GAS411GSBZ, GAS421GSBZ
H
Y – Y
B
Drawer/
cabinet
Side panel
A
S*
≥81
T
≥90
600
≥40
0
≥50
≥50
490±1
60
0
A
Ra
373±
1
Y
Y
* The required clearance must be observed!
Type
A Depends on producer
B
H
Corner radius Ra/Ri
GAS411GSBZ, GAS421GSBZ
≥30 mm
≥95 mm
94 mm
0–5/1.5 mm
A
Worktop depth
B
Required clearance for service replacement
H
Dimension from the top of the work surface to the underside of the gas connection
Ri
Corner radii of appliance for base plate
Ra
Outer corner radii of cut-out
S
Minimum distance between the top of the work surfaces and any drawer
T
Minimum distance between the cut-out in the back and any drawer
Installation
Do not damage the sealing bead.
The sealing bead must lie all around the edge of worktop.
▸
Create an accurate installation cut-out.
▸
Carefully put the appliance in the installation cut-out and press against the worktop with sufficient overlap.
▸
Fit the four adjusting braces along the circumference of the appliance to the bore holes provided and tension the appliance against
the worktop.
Combination installation
Surface-mounted combination installation is described in document 1013773. The intermediate support 1014361 or 1019199 is re-
quired for this.
