![background image](http://html1.mh-extra.com/html/v-zug/diqs10/diqs10_operating-instructions-manual_3291262010.webp)
3 Operating the appliance
3
Operating the appliance
The appliance can be operated using the operating and display elements on the appli-
ance or the remote control (available as an accessory).
3.1
Using for the first time
Appliance configuration
The model can be used to extract or recirculate air. The appliance is set up ex-factory for
use in the extraction mode.
Setting up the appliance for use in the recirculation mode
▸ Switch the appliance and the illumination off.
▸ Hold the
button depressed for 5 seconds.
–
FC.
appears in the display with a dot that flashes
twice
.
–
The appliance is now configured for the recirculation mode and the saturation indic-
ator for the activated charcoal filter is activated.
Setting up the appliance for use in the extraction mode
▸ Switch the appliance and the illumination off.
▸ Hold the
button depressed for 5 seconds.
–
FC.
appears in the display with a dot that flashes
once
.
–
The appliance is now configured for the extraction mode and the saturation indic-
ator for the activated charcoal filter is deactivated.
3.2
Switching the appliance on/off
▸ Touch the
button.
–
The appliance switches on at power level 1.
▸ Touch the
button again.
–
The appliance switches off.
3.3
Illumination
▸ Touch the
or
button.
–
The illumination switches on at the selected light intensity.
▸ Touch the previously selected button
or
again.
–
The illumination switches off.
The illumination can be used independently of the extractor fan.
Changing the light intensity
▸ Touch the
button.
–
The illumination switches on at high intensity.
▸ Touch the
button.
–
The illumination switches on at low intensity.
10