V-ZUG DIPQG Series, Operating Instructions Manual

Page: 20 / 32

Cleaning
Clean the grease filters and combi filters on their own in an upright position
in a dishwasher.
Set the dishwasher to an «intensive» or «heavy» soiling programme.
Cleaning may cause the grease filters to become discoloured. This will
not affect the functioning of the filters in any way.
If no dishwasher is available:
Clean the grease filters in the sink with hot water and detergent.
Then soak the filters in hot water in the sink for about 2 hours and finally
clean with a washing-up brush.
Do not damage the metal mesh of the combi filter.
Installing the grease filters and combi filters
Insert the grease filters 3 into the
slots at the back.
Pull the grip
4 down.
Swing the grease filters
3
up and
engage in position.
Insert the raised part of the combi
filters
2 into the white recessed
parts of the hood. Ensure that the
metal mesh is aligned in the direc-
tion of the edge of the glass cover.
Carefully swing up the glass cover
1
until all the magnets are engaged.
With the appliance switched off,
depress the button for
5 seconds to reset the saturation
indicator.
The flashing display goes out.
2
1
4
3
5 Care and maintenance
20