background image

2

Thank you for choosing to buy one of our products. Your appliance is made 
to high standards and is easy to use. Nevertheless, please take the time to 
read these operating instructions in order to familiarize yourself with the 
appliance and get the best use out of it.

Please follow the safety precautions.

 

Modifications

Text, diagrams and data correspond to the technical standard of the appli-
ance at the time these operating instructions went to press. The right to make 
technical modifications for the purpose of the further development of the 
appliance is reserved.
 

Symbols used

Indicates step-by-step instructions.

– Describes how the appliance reacts to the steps taken.

• Indicates a list.

 

Validity

The model number corresponds to the first 3 digits on the identification plate. 
These operating instructions apply to the models:

Variations depending on the model are noted in the text.

© V-ZUG Ltd, CH-6301 Zug, 2011

Denotes important safety precautions. Failure to observe said 
precautions can result in injury or damage to the appliance or 
fittings!

Denotes useful tips for the user.

Type

Model no.

Size system

Type

Model no.

Size system

DW-SE6

048

60

DI-SE10

076

100

DW-SE7

054

70

DI-SE12

077

120

DW-SE9

059

90

DW-SE12

068

120

Summary of Contents for DI-SE10 076





























Reviews: