![background image](http://html1.mh-extra.com/html/v-zug/df-s5/df-s5_operating-instructions-manual_3136730018.webp)
… Care and maintenance
18
Replacing the standard activated charcoal filter
Standard activated charcoal filters are only used in the recirculation model.
The standard activated charcoal filter is to be replaced after an operating time
of 3 to 6 months. Standard activated filters cannot be washed or
regenerated.
A
Remove metal grease filters
1
.
A
Press the two red retaining slides
2
on the standard activated charcoal
filter
3
upwards. At the same time pull down the filter and remove from the
holder
4
.
A
Slide the new filter up under the clip and fix in the holder
4
. To do this snap
the red retaining slides
2
into place.
A
Replace metal grease filters.
A
Put screw fuse back in or switch circuit breaker on again.
Remove screw fuse or switch off circuit breaker.
The dirty standard activated charcoal filter can be disposed of in the
domestic waste.
3
2
4
3
2
1