4 Care and maintenance
17
4.4
Replacing the standard activated charcoal filter
Standard activated charcoal filters are only used in the recirculation model.
The standard activated charcoal filter is to be replaced after an operating time
of 3 to 6 months. Activated charcoal filters cannot be washed or regenerated.
➤
Remove both metal grease filters
1
.
➤
Press the two red retaining slides
2
on the standard activated charcoal
filter
3
upwards and at the same time lift the filter down and out of its
fixture
4
.
➤
Slide the new filter up under the clip and secure in the fixture
4
. To do this
snap the red retaining slides
2
into place.
➤
Put back both metal grease filters
1
.
➤
Put the screw fuse back in or switch the circuit breaker on again.
Remove screw fuse for the appliance or switch off circuit breaker.
The spent standard activated charcoal filter can be disposed of with
the household waste.
3
1
2
4
3
2
