V-ZUG CookTop V2000 J604, Operating Instructions Manual

Page: 14 / 24

5 Care and maintenance
Operation with the bridging function switched on
The power level can only be adjusted using the dial for the front cooking zone.
Switching the bridging function off
▸ Set the dial for the front cooking zone to .
– Both displays go out.
– An acoustic signal is emitted.
Both cooking zones can be regulated separately again.
In order to be able to use the rear cooking zone again, the dial must first be turned
back to the power level.
5 Care and maintenance
Ideally, clean the appliance when it has completely cooled down.
Burns hazard!
Always clean the hob after use. This prevents food residue from burning on. Dried-on or
burned-on food residue is harder to clean off.
Use of improper cleaning techniques can result in damage to the markings or surface.
Avoid cleaning the surface of the glass ceramic hob with abrasive cleaning agents,
scouring pads, wire wool, etc. as they can damage the surface.
▸ Use only a soft cloth or sponge with water and standard washing-up liquid for clean-
ing everyday soiling.
▸ Remove stubborn soiling, e.g. boiled-over milk, while still warm using a glass ceramic
hob scraper. Always follow the scraper manufacturer's instructions for use.
▸ Foods with a high sugar content, e.g. marmalade, that boil over should be removed
while still hot using a glass ceramic hob scraper. The surface of the glass ceramic
hob could otherwise become damaged.
▸ Remove melted plastic while still warm using a glass ceramic hob scraper. The sur-
face of the glass ceramic hob could otherwise become damaged.
▸ Remove limescale stains when cool with a small amount of mild vinegar cleaner or
lemon juice. Then wipe clean with a damp cloth.
▸ Use a suitable Cleaning agent (see page 15) to remove stubborn soiling.
Cleaning
For good results, follow these cleaning instructions.
▸ To clean thoroughly, remove most of the soiling using a hob scraper or a special
cleaning sponge for glass ceramic hobs.
14