V-ZUG CookTop V2000 I302, Operating Instructions Manual

Page: 14 / 28

4 Operating the appliance
4.8 Operating time
Do not leave the hob unattended during use. Risk of boiling over, burning on and
igniting!
With the operating time function, a Cooking zone switches off automatically after a set
time 1 min. – 1 hrs. 59 mins..
Setting the operating time
▸ Select the required cooking zone with power level set.
▸ Touch the
button.
– flashes in the display.
▸ Touch the slider for the required cooking zone.
– The symbol for the cooking zone selected illuminates.
– The indicator light for the cooking zone selected illuminates.
▸ Use the button to increase the operating time or use the button to reduce the
operating time.
Changing the operating time
▸ Touch the button.
– flashes in the display.
▸ Touch the slider for the required cooking zone.
– The remaining operating time for the cooking zone selected is displayed.
– The indicator light for the cooking zone illuminates.
▸ Use the or button to change the operating time.
To quickly change the operating time, press and hold the or button.
If the setting is not changed, it will be automatically accepted after 5 seconds. Alternat-
ively, the setting can also be confirmed manually by touching the slider for the corres-
ponding cooking zone.
Switching the operating time function off before time
▸ Touch the button.
▸ Touch the slider for the required cooking zone.
▸ Touch the and buttons at the same time.
– flashes in the display.
– The cooking zone continues to run.
End of the operating time
When the operating time is up
– the relevant cooking zone switches off.
– an acoustic signal is emitted.
– and flash above the slider.
Touch any button to switch off the acoustic signal and the display.
– If no buttons are pressed, the acoustic signal switches off automatically after
1 minute.
Several operating times
If operating times are set for several cooking zones,
– the shortest operating time is displayed.
– the corresponding cooking zone indicator light illuminates.
14