10 Trouble-shooting
9.5
Replacing the illumination
For safety reasons, the illumination must be replaced by our Customer Services.
10
Trouble-shooting
You may be able to trouble-shoot the following malfunctions yourself. If not, note down
the error message in full (message, F and E numbers) and call Customer Services.
10.1
Error messages
Message
Possible cause
Solution
▪
«FX/EXX»
▪
Various situations can
lead to an error mes-
sage.
▸ Acknowledge the error message by
touching «OK».
▸ Switch the power supply off for about
1 minute.
▸ Switch the power supply back on.
▸ If the error appears again, note down
the error message in full along with
the serial number (SN) of the appli-
ance.
▸ Disconnect from the power supply.
▸ Contact Customer Services.
▪
«UX/EXX»
▪
Disruption in the
power supply.
▸ Acknowledge the error message by
touching «OK».
▸ Switch the power supply off for about
1 minute.
▸ Switch the power supply back on.
▸ If the error appears again, note down
the error message in full along with
the serial number (SN) of the appli-
ance.
▸ Disconnect from the power supply.
▸ Contact Customer Services.
39