V-ZUG CombiCooler V4000, Operating Instructions Manual

Page: 19 / 56

4 Operation
▸ If necessary, check and change the settings (see page 20).
– Any changes to the «Operating time» or «End» options cause the time remaining to
the start of operation to be recalculated.
If «Operating time» has been set, the end time cannot be set or adjusted during
operation.
Example
▸ Select the application and 180 °C.
▸ At 8:00, set an operating time of 1 hour and 15 minutes.
▸ Set the end time at 11:30.
– The appliance switches on automatically at 10:15 am and off again at 11:30.
4.7 Options
Overview
Each application offers different options. Your appliance has the following options:
Start later (see page 20)
Selecting and starting options
▸ Select an application from the desired application group and confirm with «OK», if re-
quired (see page 16).
– The ready to start screen appears in the display.
▸ Touch .
– The options menu appears in the display:
Start later
This allows you to set the
appliance to start at a later
time. It retains any values
you entered and does not
switch to standby mode.
Start later
On
OK
▸ Touch the desired option.
▸ In the right content pane of the display, either turn on the option with the switch or
touch the value range and set the desired value using the CircleSlider.
–
Each defined option is marked with a .
▸ Confirm the setting with «OK».
– Several settings can also be confirmed at once with «OK».
– The ready to start screen appears in the display.
▸ Press «Start» to start the application.
19