4 Operation
If the application has been running for less than 1 minute when cancelled, the
ready to start screen appears.
Sabbath applications can only be cancelled using the function button (see page
36).
Ending an application before time
▸ Press and hold the function button.
–
Any running application is ended; if turned on, the timer or heatable appliance
drawer will remain active.
–
If turned on, the display lock is deactivated.
–
The appliance switches off (see page 30).
4.20
End of operation
–
The application ends automatically.
–
An acoustic signal is emitted.
–
In the display appears: «Process finished».
▸ To confirm the message, press «OK».
–
Depending on the application, the following available options are displayed:
▪
Select one of the displayed subsequent steps to continue operation with another
application (see page 30).
▪
Select the function button to access the parent application menu.
▪
Select the
function button to access the start screen (see page 17).
▪
Press and hold the function button to switch the appliance off (see page 30).
In EcoStandby as long as the temperature in the cooking space is over 80° C.
–
In the display appears: «Residual heat in the cooking space».
After 3 minutes without interaction.
–
The display goes dark and the appliance switches off automatically (see page
30).
Removing the cooked food from the cooking space
Risk of burns!
Hot steam or hot air may escape from the cooking space when the appliance door
is opened. The accessories get hot. Use protective gloves or oven cloths.
▸ Take the food out of the cooking space when done.
▸ Any condensate or food particles in the cooking space must be completely removed
after each cooking session with steam.
▸ Wipe away traces of water or soiling with a soft cloth to prevent corrosion and un-
pleasant odours.
▸ Leave the appliance door open in the airing position until the cooking space has
cooled down and dried out.
29
