5 Applications
5.20
Hygiene
«Hygiene» can be used for sterilizing containers. The following applications are avail-
able:
Sterilizing baby bottles
Final sterilization of jam jars
Sterilizing preserving jars
Sterilizing baby bottles
This application replaces the need to boil feeding bottles in water.
Before starting the application:
▸ Clean the bottles.
▸ Unscrew the feeding bottles and place all parts into the perforated cooking tray.
After the application has finished:
▸ Stand the bottles upside down on a clean kitchen towel and leave to dry completely.
Sterilizing preserving jars
This application replaces the need to prepare the empty jars by rinsing them with hot wa-
ter.
Final sterilization of preserving jars
This application helps to preserve the jam for longer.
5.21
Recipe book
The following recipe books are available for this appliance:
▪
«Steaming. With a passion for detail.»
▪
«Baking. With a passion for detail.»
Recipes that are tailored to your appliance can be found in the recipe books. They are
pre-programmed in the appliance and once started run automatically.
You can order the «Steaming» recipe book for your appliance at a cost using the order
card enclosed. The recipe book is available in German, French, Italian and English.
As your appliance has the necessary applications, you can also order the «Baking» re-
cipe book at a cost. The recipes from both cookbooks are already unlocked in your ap-
pliance provided it has the necessary applications.
Starting a recipe
For recipes that do not require preheating, place the food in the cold cooking
space.
▸ Long touch the display.
–
The start screen appears.
For recipes with steam:
▸ Fill the water tank up to the «max.» mark with fresh, cold drinking water and slot into
position in the water tank compartment.
▸ Select the
«Recipes» application group and confirm with «OK», if required (see
▸ Select the desired recipe book.
▸ Select the desired chapter.
▸ Select the desired recipe and confirm with «OK».
–
The settings for the recipe appear in the display.
–
Set an end time or a delayed start, if required (see page 20).
43
