V-ZUG Combair V6000, Operating Instructions Manual

Page: 21 / 68

4 Operation
▸ Confirm the setting with «OK».
– Several settings can also be confirmed at once with «OK».
– The ready to start screen appears in the display.
▸ Press «Start» to start the application.
The options «Operating time», «End» and «Food probe temperature» can be set
directly in the ready to start screen.
4.8 Checking and changing the settings
Values and settings can be changed before and during operation. Exceptions are setting
the end time during operation (see page 28) and preheating (see page 21).
Only the operating time can be set for Sabbath applications.
▸ Touch the field for the desired setting.
▸ To adjust or reset a value, touch the value range and adjust the value using the
CircleSlider.
– The colour of the value range changes to amber.
– The value can be reset with .
▸ To turn the option on or off, touch the switch.
▸ Confirm the setting with «OK».
4.9 Preheating
If the «Preheat» option has been turned on, do not put the food into the cooking
space until the acoustic signal is emitted and the corresponding message ap-
pears.
With «Preheat», the cooking space is quickly heated up to the desired temperature.
Overview
Preheating is only possible for the following applications:
Top/bottom heat Grill
Top/bottom heat humid Grill-forced convection
Bottom heat Hot air
PizzaPlus Hot air humid
Turning on preheating in the options
▸ Select the desired application (see page 16).
▸ Touch
«Options» and select «Preheat».
▸ Touch the «Preheat» switch.
– «Preheat» is turned on.
▸ Set further options, if required (see page 20).
▸ Confirm the setting with «OK».
▸ Press «Start» to start an application requiring preheating.
– «Preheating» starts.
– The progress of «Preheating» is displayed.
21