V-ZUG Combair V6000 45, Operating Instructions Manual, Page: 57 / 68

9 Trouble-shooting
Message Possible cause Solution
▪ «UX/EXX» ▪ Disruption in the
power supply. ▸ Acknowledge the error message by
touching «OK».
▸ Switch the power supply off for about
1 minute.
▸ Switch the power supply back on.
▸ If the error appears again, note down
the error message in full along with
the serial number (SN) of the appli-
ance (see page 59).
▸ Disconnect from the power supply.
▸ Contact Customer Services.
▪ «E69/A1» ▪ Temperature must
drop below 300 °C ▸ Allow the appliance to cool down.
▸ Acknowledge the error message by
touching «OK».
– Appliance is ready for operation
again.
▪ «E24/A1» in
pyrolytic appli-
ances ▪ Door status detection
failed. ▸ Push in the door status detection
device next to the locking hook and
keep it pressed.
– The following appears in the dis-
play: «OK».
▸ Press «OK».
▸ Push in the lever of the door status
detection device for 15 seconds. Dur-
ing these 15 seconds, the locking
hook will move.
9.2 Other possible problems
Problem Possible cause Solution
▪ Appliance is
not working ▪ A household fuse or
circuit breaker has
tripped. ▸ Change the fuse.
▸ Reset the circuit breaker.
▪ The fuse or circuit
breaker keeps blow-
ing. ▸ Call Customer Services.
▪ Interruption in the
power supply. ▸ Check the power supply.
▪ Demo mode is
switched on. The demo mode can only be switched
off with the security code.
▸ Contact Customer Services.
▪ Appliance is faulty. ▸ Contact Customer Services.
57