5 Using the appliance
Perishables should not be kept unrefrigerated.
Before setting the delayed start
▸ Place the food in the cooking space.
▸ Select the desired operating mode.
▸ Set the temperature.
▸ Set the duration.
Setting a delayed start
▸ Select
in the operating mode settings.
–
The current end time calculated using the duration is displayed.
▸ Set the desired end and confirm.
–
The time remaining to the start of operation is displayed.
–
After 3 minutes, the display goes out and the
touch button is illuminated in
white. The display can be called up again at any time by pressing the adjusting
knob.
–
The appliance remains switched off until 3 minutes before the automatic start of op-
eration.
▸ Check and change the settings (see page 18).
Example
▸ Select the
operating mode and 180°C.
▸ At 8:00, set a duration of 1 hour and 15 minutes.
▸ Set the end time to 11:30.
–
The appliance will automatically switch on at 10:15 and off again at 11:30.
5.5
Food probe temperature
Only use the supplied food probe.
Do not clean the food probe in the dishwasher. Always keep the plug clean.
The food probe is used to measure the temperature inside the food (referred to as the
food probe temperature
). As soon as the food reaches the
target temperature
(the food
probe temperature that should be attained at the end of the cooking process), operation
stops automatically. It is also possible to simply measure the food probe temperature
without stopping operation.
The food probe must be inserted as far into the middle of the meat as possible to
get a correct reading of the food probe temperature.
The optimal target temperature is dependent on the cut of meat and on the degree
of doneness.
Refer to the information on target temperatures in «EasyCook».
Setting
▸ Select the desired operating mode and set the temperature.
▸ Select
in the operating mode settings.
▸ Set the desired target temperature and confirm.
▸ To start operation, select .
19
