V-ZUG C6T-21050, Operating Instructions Manual, Page: 53 / 68

8 Care and maintenance
Ensure that the appliance door is pushed in as far as it will go otherwise the appli-
ance could get damaged when it is closed.
Cleaning the door glass
▸ Lay the appliance door on a clean, flat surface
(covered e.g. with a tea towel) with the handle
facing down.
– Make sure the handle does not come into
contact with the surface.
▸ Lean against the appliance door.
▸ Carefully push the glass
1 and raise it slightly
up and away from the hinges.
1
▸ Remove the seal 2 .
▸ Gently push the door glass 3 and raise it
slightly up and away from the hinges.
2
3
Applies to pyrolytic appliances:
▸ Remove the seal 4 .
▸ Gently push the door glass 5 and raise it
slightly up and away from the hinges.
▸ Clean the glass panels and dry well.
4
5
▸ Put the door glass 5 back in. To do this, insert
the door glass 5 into the door frame and gently
push it back towards the hinges.
– The markings on the glass must be legible.
▸ Fit the seal 4 .
4
5
53