V-ZUG C4T-21045, Operating Instructions Manual

Page: 20 / 68

4 Operation
Measuring the food probe temperature
To measure the food probe temperature only and without operation stopping automatic-
ally when the target temperature is reached, proceed as follows:
▸ Select the desired application (see page 15).
▸ Plug in the food probe.
▸ Press «Start» to start the application.
4.7 Options
Overview
Each application offers different options. Your appliance has the following «Options»:
Preheat (see page 21)
Food probe temperature (see page 19)
Start later (see page 22)
Selecting and starting options
▸ Select an application from the desired application group and confirm with «OK», if re-
quired (see page 15).
– The ready to start screen appears in the display.
▸ Touch .
– The options menu appears in the display:
OK
Start later
Food probe
The core temperature can
be monitored with the food
probe or can be used instead
of the operating time to
automatically switch off
operation.
57°C
Food probe
▸ Touch the desired option.
▸ In the right content pane of the display, either turn on the option with the switch or
touch the value range and set the desired value using the CircleSlider.
– Each defined option is marked with a .
▸ Confirm the setting with «OK».
– Several settings can also be confirmed at once with «OK».
– The ready to start screen appears in the display.
▸ Press «Start» to start the application.
The «Food probe temperature» option can be set directly in the ready to start
screen. if the food probe is plugged in.
20