4 Care and maintenance
4
Care and maintenance
4.1
Cleaning the housing
Make sure no water gets inside the appliance. If water gets into the appliance, it
can cause damage.
Do not use abrasive cleaners, scouring pads, steel wool, etc. for cleaning, as they
can damage the surface. Disconnect the power supply before cleaning.
Exterior
▸ Clean using a clean, damp cloth and a mild detergent, then wipe dry.
Interior
Grease and condensate water can build up on the inside around the metal grease filters.
▸ Clean using a clean, damp cloth and a mild detergent, or a soft brush as needed,
then dry well using kitchen towel.
4.2
Metal grease filters
The metal grease filters should be cleaned at least every two months with normal use
(more frequently with intensive use) and whenever the saturation indicator alarm is
triggered. If properly cared for, the grease filters should provide years of service.
Removing
1
2
▸ Fold down the metal grease filters
at the front and carefully remove from the slots
in the fixture.
Cleaning
▸ Clean the metal grease filters in the dishwasher. Select the «intensive» dishwasher
programme. If no dishwasher is available: Soak the grease filters in hot water and mild
detergent.
▸ Clean, rinse well with clean cold water and then wipe dry.
–
Grease filters can be used again after being cleaned.
▸ Put the metal grease filters back.
▸ Reset saturation indicator alarm (see page 18).
Cleaning may cause the metal grease filters to become slightly discoloured. How-
ever, this will not affect the functioning of the filters in any way.
16
