10 Care and maintenance
10.2
Cleaning the spray arms
Upper spray arm
▸ Remove the upper basket.
1
2
▸ Release the bayonet fastener
1
in an anti-clockwise
direction and remove.
▸ Remove the spray arm
2
from the shaft and rinse well
under running water.
▸ Check the nozzles.
Lower spray arm
▸ Hold the spray arm
3
in the middle and pull hard up-
wards.
3
4
5
▸ Rinse the spray arm well under running water.
▸ Check the nozzles
4
.
▸ Clean the filter system
5
and the coarse filter (see
10.3
Cleaning the filter system
Only use soft materials for cleaning beneath the filter system. Never use metal ob-
jects.
An incorrectly assembled filter system can cause the appliance to malfunction.
▸ Open the appliance door and pull out the lower bas-
ket.
1
2
3
▸ Release the filter system in fine filter
1
in an anti-
clockwise direction and remove.
▸ Open the coarse filter
2
by pressing on closing lug
3
and clean the filter system under running water using
a brush.
▸ Remove any coarse debris.
▸ Replace the filter system and turn the fine filter
1
as
far as it will go in a clockwise direction.
45
Summary of Contents for AdoraDish V6000 OptiLift
Page 4: ...4 15 Notes 60 16 Service Support 63...
Page 60: ...60 15 Notes...
Page 61: ...61...
Page 62: ...62...
