V-ZUG AdoraDish V6000 OptiLift, Operating Instructions Manual, Page: 42 / 64

9 User settings
Rinse agent dosage Selection
The rinse agent dosage is automatically ad-
justed to the load and the water hardness. If
the drying result is unsatisfactory, the dosage
can be set manually
to one of 12 levels.
The rinse agent dosage can be turned off .
▪ Automatic (factory setting)
▪ Level 1–12
▪ Off
Water hardness Selection
The unit of water hardness can be set to «°fH»
or «°dH» . The water hardness setting can be
changed to suit local conditions. Contact your
local water authority or see
www.trinkwasser.ch
for the relevant information.
▪ °fH: French degree of hardness
(factory setting: 26–30)
▪ °dH: German degree of hardness
Soft Medium Hard Very hard
°fH
0–
5
6–
10
11–
15
16–
20
21–
25
26–
30
31–
35
36–
40
41–
50
51–
60
61–
70
71–
80
81–
120
°dH
0–
3
4–
6
7–
9
10–
12
13–
14
15–
16
17–
19
20–
22
23–
27
28–
32
33–
38
39–
45
45–
65
Temperature unit Selection
The temperature unit can be displayed in «°C»
or «°F». ▪ °C: Degrees Celsius (factory set-
ting)
▪ °F: Degrees Fahrenheit
Interior illumination Selection
If the user setting is activated, from a certain
door opening angle the interior is illuminated
for the set duration. Five different durations are
available for selection. ▪ : Activated (factory setting: 10
minutes)
▪ : Deactivated
Automatic door opener Selection
If the user setting is activated, the appliance
door opens slightly automatically during the
drying and final drying phase to save energy. If
the user setting is deactivated, the programme
time is extended by 10 minutes. ▪ : Activated (factory setting)
▪ : Deactivated
Operation and door angle Selection
If the user setting is activated, the display is
locked and cannot be operated when the door
opening angle is greater than 46° so as to
prevent any of the settings being inadvertently
changed. ▪ : Activated
▪ : Deactivated (factory setting)
42