V-ZUG AdoraDish V4000 OptiLift, Operating Instructions Manual, Page: 14 / 72

4 Functions
4 Functions
4.1 Programmes
Consumption values
The programme time (h), water consumption (l) and energy consumption (kWh) are in-
dicative values. The values can also vary according to the selection of additional func-
tions, the load, the degree of soiling of the load, the type and amount of detergent, the
water inlet temperature, the electrical connection and specific programme sequences
(e.g. regeneration).
The programme time, water consumption and energy consumption can be re-
duced by selecting the «Energy saving»
and «Partial load» setting options.
Programme times
The stated values exclude the final drying time.
Eco Programme phases Consumption values
The most efficient programme in
terms of water and energy con-
sumption for washing normally
soiled dishes (declaration pro-
gramme). After running the dish-
washer 7 times, the water softener
is regenerated at the end of that
programme. This increases the wa-
ter consumption by 0.2 l. During
the next programme, the water
softener is flushed through with an
additional 4 l water. This increases
the duration of the programme by
5 minutes. ▪ Cleaning: 50 °C
▪ Intermediate rinsing
▪ Rinsing with rinse
agent: 35 °C
▪ Drying
▪ 6h30–7h30
▪ 9.3–9.8 l
▪ 0.565–0.573 kWh
Automatic Programme phases Consumption values
Optimum cleaning results with min-
imal water and energy consump-
tion. For normal soiling. Not suit-
able for burned-on or heavily dried-
on soiling.
▪
Pre-rinsing (if required):
cold
▪ Cleaning: 50–60 °C
▪ Intermediate rinsing (if
required)
▪ Rinsing with rinse
agent: 55 °C
▪ Drying
▪
1h00–1h50
▪ 8–20 l
▪ 0.7–1.25 kWh
14