V-ZUG AdoraDish V2000, Operating Instructions Manual

Page: 36 / 52

9 User settings
Rinse agent dosage Selection
The rinse agent dosage is automatically ad-
justed to the load and the water hardness. If
the drying result is unsatisfactory, the dosage
can be set manually
to one of 12 levels.
The rinse agent dosage can be turned off .
▪ Automatic (factory setting)
▪ Level 1–12
▪ Off
Water hardness Selection
The unit of water hardness can be set to «°fH»
or «°dH» . The water hardness setting can be
changed to suit local conditions. Contact your
local water authority or see
www.trinkwasser.ch
for the relevant information.
▪ °fH: French degree of hardness
(factory setting: 26–30)
▪ °dH: German degree of hardness
Soft Medium Hard Very hard
°fH
0–
5
6–
10
11–
15
16–
20
21–
25
26–
30
31–
35
36–
40
41–
50
51–
60
61–
70
71–
80
81–
120
°dH
0–
3
4–
6
7–
9
10–
12
13–
14
15–
16
17–
19
20–
22
23–
27
28–
32
33–
38
39–
45
45–
65
Temperature unit Selection
The temperature unit can be displayed in «°C»
or «°F». ▪ °C: Degrees Celsius (factory set-
ting)
▪ °F: Degrees Fahrenheit
FunctionLight * Selection
The brightness of the illumination of the door
gap can be changed or deactivated using the
and buttons. Three different levels of
brightness are available for selection.
▪ : Activated (factory setting: Level
2)
▪ : Deactivated
* Depending on model
Automatic door opener Selection
If the setting is activated, the appliance door is
automatically opened slightly during the drying
and final drying phase to save energy. If the
setting is deactivated, the programme time is
extended by 10 minutes. ▪ : Activated (factory setting)
▪ : Deactivated
36