![background image](http://html1.mh-extra.com/html/v-zug/adora-tsl-wp/adora-tsl-wp_operating-instructions-manual_3102027014.webp)
… Your appliance
14
Using for the first time
When the appliance is connected to the power supply for the first time, it is possible
to select a function test. The purpose of the function test is to check the installation and
it lasts about 3 minutes. The heat pump is not started. The function test can therefore
be selected immediately after installation.
A
Connect the appliance and wait until the
following appears in the plain text display:
Start function test «YES»:
Start function test «NO»:
Once the function test has been run, it can no longer be selected and the appliance
enters the normal selection mode.
A
Press the
button.
– The function test starts (the washing drum reverses and the process fan
starts).
The function test cannot be interrupted by pressing the
button or by
disconnecting the power.
A
Press the
button.
– The function test is deselected
The appliance must be allowed to stand in the normal operating position for
about 2 hours before starting the heat pump.
F u n c t i o n t e s t
NO:
YES: