6
Operation
6.1
Preparing the appliance
Opening the appliance door
Pull the door handle forwards.
– Any programme that is running will be automatically
interrupted.
Before using for the first time
Switch the power on.
Turn on the water tap.
Fill the salt reservoir with approximately 1.0 l water and 1 kg regeneration
salt.
For hygiene reasons, regeneration salt is also recommended for use
with low water hardness and
detergents.
Wipe away excess salt on the edge of the salt reservoir.
Fill the rinse agent reservoir with rinse agent.
Run the
programme without dishes to protect the appliance from
corrosion from any excess salt and to remove factory-related grease
deposits.
On initial use, the refill indicator can remain illuminated for several
wash cycles.
goes out when the salt concentration in the reservoir is evenly
distributed (after about 10 wash cycles).
25
